Tag Archives: KTAG

Read VAG EDC17CP44 via OBD or BOOT mode?

Possible to read/write VAG ECU EDC17CP44 via OBD? And which tool can do it? Here you go.   EDC17CP44 details: Information: BSL130 no BSL131 yes BSL132 yes BSL-ADP required   ECU pins: Use Plug – Pin 12V T91 – Pin … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment

How to use KTMFlASH ECU Programmer

What’s KTMFlash? The KTMFlash is a ECU Programmer & transmission power upgrade tool which can read the chip data, change the engine computer, read transmission data etc at a high speed. KTMflash Functions: 1.Read the car ecu via OBD. 3.Read the BOOT mode according … Continue reading

Posted in car ECU programmer | Tagged , , | Leave a comment

Can I use Kess 5.017 or Ktag 7.020 for Abarth 124 Marelli 8GMK read/write?

Purpose: Read a Magneti Marelli 8GMK from an Abarth 124 Optional ECU programming tool: Kess V2 firmware 5.017 and Ktag firmware 7.020 Basic info: 500x with same ecu is supported by Kess 5.017 (protocol 532), but 124 has a new … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment

Ktag 7.020 Read Citroen C4 Bosch MEV17.4.2 on Bench

How to: read a Citroen C4 1.6 gasoline engine Bosch MEV17.4.2 from PSA group. And was read in boot mode using KTag 7.020.   Bosch MEV17.4.2 == MEV174 reading with Ktag Open ECU Follow wiring diagram to connect ECU with … Continue reading

Posted in car ECU programmer | Tagged , , | Leave a comment

Ktag 7.020 EU Online Red Board with 4 LED Indicators

2018 new Ktag Firmware V7.020 EU version with red PCB and 4 LED indicators is now rolled out in obdii365.com. What’s new: Ktag V7.020 Red PCB EU Version With 4 LED Indicators: Murata filter  Buzzer protect ECU/KEY/Power/Data LED Indicator KTAG 7.020 New Added … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment

Nissan Almera N16 MEC32-241 Immo Off with Ktag

Here’s the tutorial on disabling immo (immo off) on a Nissan Almera 1.5 QG15DE engine .   Disclaimer: The tutorial was made by a Russian technician. We just translated it for educational purpose.    Appearance with the connection. The offspring of … Continue reading

Posted in car ECU programmer | Tagged , | Leave a comment

Ktag Read BMW N46 Bosch MEV 17.4.6 on bench

Just done BMW Euro 2 / chip tuning on a BMW N46 Bosch mev 17.4.6 ecu by using ktag master ecu chip tuning tool. On the table through ktag 7.020 http://www.obdii365.com/producttags/ktag.html

Posted in car ECU programmer | Tagged , | Leave a comment