Tag Archives: ktag 7.020

Can I use Kess 5.017 or Ktag 7.020 for Abarth 124 Marelli 8GMK read/write?

Purpose: Read a Magneti Marelli 8GMK from an Abarth 124 Optional ECU programming tool: Kess V2 firmware 5.017 and Ktag firmware 7.020 Basic info: 500x with same ecu is supported by Kess 5.017 (protocol 532), but 124 has a new … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment

Ktag 7.020 Read Citroen C4 Bosch MEV17.4.2 on Bench

How to: read a Citroen C4 1.6 gasoline engine Bosch MEV17.4.2 from PSA group. And was read in boot mode using KTag 7.020.   Bosch MEV17.4.2 == MEV174 reading with Ktag Open ECU Follow wiring diagram to connect ECU with … Continue reading

Posted in car ECU programmer | Tagged , , | Leave a comment

Ktag 7.020 EU Online Red Board with 4 LED Indicators

2018 new Ktag Firmware V7.020 EU version with red PCB and 4 LED indicators is now rolled out in obdii365.com. What’s new: Ktag V7.020 Red PCB EU Version With 4 LED Indicators: Murata filter  Buzzer protect ECU/KEY/Power/Data LED Indicator KTAG 7.020 New Added … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment

Nissan Almera N16 MEC32-241 Immo Off with Ktag

Here’s the tutorial on disabling immo (immo off) on a Nissan Almera 1.5 QG15DE engine .   Disclaimer: The tutorial was made by a Russian technician. We just translated it for educational purpose.    Appearance with the connection. The offspring of … Continue reading

Posted in car ECU programmer | Tagged , | Leave a comment

Ktag Read BMW N46 Bosch MEV 17.4.6 on bench

Just done BMW Euro 2 / chip tuning on a BMW N46 Bosch mev 17.4.6 ecu by using ktag master ecu chip tuning tool. On the table through ktag 7.020 http://www.obdii365.com/producttags/ktag.html

Posted in car ECU programmer | Tagged , | Leave a comment

Ktag firmware 7.020 Update by Changing CID SD Card

This is the Ktag 7.020 firmware master clone and SD card method.   With thanks to ovi730 and SVVAG2000 Now the solution of 7.020 is complete Attached firmware of 7.020 ktag – no crp lock to cpu , SD image and necessary … Continue reading

Posted in car ECU programmer | Tagged , , | Leave a comment

How to Read BMW X5 2013 edc17cp45 with KTAG Clone

Question: I have a bmw with edc17cp45. Car is x5 4.0 yes I know this is 3.0 diesel engine year is 2013. Some were I read this ecu is password protected.  What tool and how to read the data?   … Continue reading

Posted in car ECU programmer | Tagged , , , | Leave a comment