Post topic: BMW ICOM Next fw: 1.4 1.40.05 bootimage 1.25.02 download and update instructions.
Free download BMW ICOM Next firmware 1.40.05:
Compatible ICOM Next interface:
- BMW ICOM NEXT fw:1.4.0 V2017.03 Rheingold ISTA-D ISTA-P (Item No. SP269-1)
- BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269)
- Wifi BMW ICOM NEXT fw:1.4.0 with no Rheingold ISTA-D ISTA-P(Item No. SP269-B)
Tip:To run ICOM Next A+B+Cnewest Rheingold ISTA-D 4.04.12 ISTA-P 3.60.2.001, ICOM Next firmware needs to be updated to the current SYSTEM IMAGE version: 01.25.02 and current APPLICATION IMAGE version: 1.40.05.
ICOM Next fw 1.40.05/01.25.02 update steps:
- Please use internet cable to connect ICOM Next with the computer, and charge ICOM Next via 12V power adapter or connect ICOM Next to BMW vehicle for power.
- Use IE Internet Explorer to open http://169.254.33.45:60080/, username/password: root/NZY1150263
- Select “Update Firmware”, you can see ICOM firmware version information.
- Select “Browse” to select file “ICOM-BootImage-01-25-02.bin”, set image type as “SYSTEM”, click “Send the file”.
- Select “Yes” when you get prompt “Write the image file to the flash?”, then ICOM indicator light will turn red.
- When it shows “The SYSTEM IMAGE update was successful”, click “Update Firmware”.
7. Choose “ICOM-ApplicationImage-01-40-05.bin”, set image type “APPLICATION”, click “Send the file”, this will be done in several minutes please be patient.
- click “Yes” when you get prompt “Write the image file to the flash?”, then the ICOM indicator light will turn red again.
- Complete updating, click “reboot”.
- Click “Home” – “Update Firmware”, you will see ICOM Next firmware display the newest version.
Make sure your computer obtain IP address automatically.
Done! GOOD LUCK!