KWP2000 “Error setting transmission Timing” Solution

I had error with KWP2000 plus ECU flasher when read Golf 4 1.9 TDI ALH edc15 ecu.

 

Problem:
Hello, I do have an Golf MK4, and bought an KWP2000+ adapter to read the ECUs file.
The injectors and the Turbo is upgraded, so I have to change maps a bit.

I got the ECU Information out correctly, but when I started the readout process, the kwp2000 software told me to take fuse 11 out, after doing this, I got the message “Error setting transmission Timing”. Do I need an direct Plug for the ECU and remap it at home?
I also unplugged the Radio, did not help at all.

Any ideas?

kwp2000-error-read-golf-edc15

Solution from obdii365.com engineer:

Solution 1:

Yes you better unplug KWP2000 and do it on table, alone

here you have Pinouts

VAG EDC15

kwp2000-glof-mk4-edc15-1

vag_edc15_v_vm

vag_edc15_obd

PIN-Plug

4-KL31 (GND)
5-KL31 (GND)
6-CAN High
7-K-line
14-CAN Low
16-KL30 (Ubat) + 12 Volt

 

 

Solution 2:

If solution 1 failed, try solution 2. 100% works.

KWP2000 is crap, buy better tool to start.. When you don’t want to spend much money, buy mpps v16 clone, works very good with the EDC15 ecu’s in car and table.

Advertisements

About eobd21

I am a car lover and like to repair car by myself, and know more info about car diagnostic tool and other obd2 tools, share these info with everyone.
This entry was posted in car ECU programmer and tagged , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s