Which tool to change Mercedes w221 mileage via OBD

Cannot change mileage on a 2009 Mercedes-benz w221 via OBD? Need to fit filter/blocker in EIS and do dash only?

NO! I did 6 merc w221 using FVDI obd without any issues.. there is an instruction on how to do it step by step in the abrites manual…. can do all control unit with it. need like 1.5 to 2 hours to finish it. it block can between IC and EIS.

I only have the R270 programmer at the moment and digiprog 3 so I think can blocker is going to be the cheapest way. If for Mercedes only, vvdi mb tool should be the best choice…program keys and repair dash km..all ok.

Here, two methods i wanna talk about…

(Easiest) Using Fvdi abrites commander obd change mileage:

 Backup important files

Open Special Function ‘CGW (ZGW) Explorer” to read the EEPROM and the flash memories of Central Gateway (CGW) control.  Back up EEPROM and the flash dumps as files in your hardware.

FVDI Mercedes will automatically back up EEPROM and the flash memories file when it reads them. The backup files should be installed on C:/Program Files/ABRITES software for IDXXXXXX/Mercedes.

 back up EEPROM

Select S-class W221

Select EEPROM, click Read EEPROM and save it to a file after EEPROM has been read.

Select EEPROM

Select Flash and click Read Flash and save it to a file after FLASH has been read.

Select Flash and click Read Flash

Modify ASSYST and ASSYST PLUS service history records

Open “ASSYST PLUS”

Select the ZGW type “W221”

Click on “Get Current” to see the internal data

Click on “ASSYST PLUS Service Memory” to view different service history

Enter “Main Odometer”, “Operating Time (Days)” and “Number of Oil Changes” to alter all this information.

Click on “Yes” when FVDI ABRITES program asks to set the information for the different service history records.

Enter detail for each record.

For example: If the vehicle has 3 records, you need to enter the details for 3 service intervals. The values for the day cycle counter should be entered in an increasing way.

Change the main Odometer in Dashboard, EZS & CGW

change the odometer in Instrument Cluster as well as in EZS and CGW module

Open “Odometer Correction” special function and select S-class W221

Then click on “Get Odometer”

Select “Set Odometer” to load EEPROM and Flash dumps

NOTE: Make sure the ignition is ON when click “Set Odometer” button

(Good for Mercedes) Using vvdi mb bga tool repair dash mileage:

Vvdi mb tool is a good solution of mercedes read & write keys/CGW (ZGW), EIS & ELS tools, password calculation of working keys and lost all key, prepare key file, renew ECU/gearbox/ISM, repair KM, etc.

It can repair dash km for models as below:

  1. C(W204), GLK(X204), CLK(W207), E(W212), SLS(W197), CLS(W218)
  2. R-Class(W251), GL(X164), ML(W164)
  3. E-Class(W211), CLS(W219)
  4. S-Class(W221), CL(216)
  5. W166, W172, W246, W231
  6. W205

W221 is listed…

If you want block KM synchronization between EZS and dashboard, you need backup CGW(Gateway) EEPROM and FLASH before write KM

block KM synchronization require update Gateway FLASH and EEPROM. You can provide the FLASH and EEPROM that you have. If you don’t provide these files. We will use the FALSH and EEPROM from Gateway, only need some time to read it.

use the FALSH and EEPROM from Gateway

Advertisements

About eobd21

I am a car lover and like to repair car by myself, and know more info about car diagnostic tool and other obd2 tools, share these info with everyone.
This entry was posted in odometer correction tool and tagged , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s